HomeFill Oxygen Compressor

HomeFill Oxygen Compressor – The Invacare HomeFill(TM) complete home oxygen system defines O2 Concentratorambulatory oxygen by allowing patients to fill their own high-pressure cylinders from a concentrator.

The HomeFill is a multi-stage pump that simply and safely compresses oxygen from any Invacare HomeFill compatible 5-liter or 10-liter concentrator into oxygen cylinders in sizes M2, ML4, ML6, M6, M9(C) and D.

The ability to fill their own cylinders gives ambulatory patients greater independence and freedom. Home care oxygen providers will also benefit from the virtual elimination of time-consuming and costly service calls associated with cylinder and-or liquid oxygen deliveries. The HomeFill ambulatory package includes the following:

  • IOH200 HomeFill Compressor
  • (2) HF2PCL6 HomeFill Patient Convenience Pack (ML6 size with integrated conservers)
  • (1) HF2PCL6BAG carrying bag
  • (1) IOH260 HomeFill Ready-Rack
Cylinder Filling Times: M2: 24 min; ML4: 55 min; ML6: 75 min;
M6: 60 min; M9: 125 min; D: 3.5 hrs.

Detailed Description

The HomeFill Oxygen System (IOH200) is an electro-mechanical prescription system for use in the home. Its intended function and use is to supply pressurized oxygen to fill Invacare proprietary gas cylinders for ambulatory use while the patient receives therapeutic oxygen from an accessory oxygen concentrator. The IOH200 gas system is designed for use with an Invacare Platinum oxygen concentrator with an integral HF2 accessory port that can supply a gas concentration greater than 90% O2 around 2 L/min. while supplying a patient therapy flow rate up to 2.5 L/min. for Platinum 5 and 5 L/min. for Platinum 9.

The HomeFill Oxygen system consists of IOH200 gas compressor, connection tubing, and the Invacare supplied portable gas cylinders with the integral flow regulator and interlocking fill fitting.

The IOH200 compressor consists of a multistage compressor, internal reservoir, control electronics with an integral oxygen concentration sensor, interlocking fill fitting, inlet fitting, and drive motor. The compressor operation is controlled by the electronics assembly. The motor/compressor is allowed to fill a cylinder only when the oxygen concentration of the inlet gas stream is greater than 90%. The motor/compressor fill operation is completed when the gas in a cylinder reaches the maximum fill pressure of 2000 PSI (13786 kPa).

The IOH200 compressor can fill cylinders for portable use by ambulatory patients. The Invacare supplied portable gas cylinders have an interlocking fill fitting that mates only with the Invacare IOH200 compressor assembly. The gas cylinder also contains an integral flow regulator with fixed, selectable flow settings.